Installation Steps - AVS Tail Shades Manual De Instrucciones

Installation Steps

NOTE: Actual application may vary slightly from drawings.
Clean dual lock mounting locations with an
Remove adhesive backing from dual lock tabs.
alcohol pad.
3 4
Position the locking tab behind tail light assembly, then Adhere the top tab over tailight assembly, then adhere
adhere dual lock strip to tail light lens by pressing on dual lock strips to surface of tailight lens by pressing
front of part. on front of part.
1 1
Camaro Mustang
Position adhere
locking tab dual lock
strip
or
tailight cover tailight cover
tailight as- tailight as-
Adhere dual lock
sembly sembly
strip
5
adhere dual
2 2
lock strip
Repeat Steps 1 - 5 for passenger side tail light cover. Allow dual lock adhesive to cure at least 24 hours
before removing tail light cover.
6
Page 2 of 3