Beaba BIB EXPRESSO BEA0206 Manual Del Usuario página 14

9. Never use water from the bain-marie mode to prepare a bottle.
10. Empty the heating unit and wipe it with a clean cloth or a paper towel before
storing your appliance.
In Bain Marie mode, the heating unit may be used without the arch support
1. To remove the heating unit#2 from the support, unlock the lock switch by
turning it anti-clockwise.
2. Place the heating unit#2 on a flat surface and then follow Bain Marie
instructions.
Bain-marie
Bain-marie
* Heating time will depend of initial water temperature
MAINTENANCE
• Always unplug the appliance before cleaning it.
• Clean the tank and surfaces with a damp cloth or sponge. Wipe carefully.
• Over time, limescale deposits may accumulate on the bottom of the tank,
descale the unit as below:
1. Remove the tank from its arch support
2. When the appliance is cold and unplugged, pour in a mixture of 50 ml of
water and 50 ml of white vinegar or BEABA cleaning solution. Leave overnight.
Never use a chemical or a coffee machine de-scaler in the unit.
3. Empty the contents of the heating unit and wipe it with a clean cloth.
4. Repeat the operation if necessary until complete removal of the limescale.
5. Complete a (
6. For storage you can unlock and remove the heating unit and place it inside
arch support (9)
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz- 60Hz. Power: 460W - 540W. Temperature for use:
10 to 40°C.
water temperature
70 °C
90 °C
) cycle with clear water before using again.
9
14
Final temperature of
Heating Time *
7 to 8 min
11 to 12 min
ENV
You bo
house
the se
local a
your a
TRO
bottle **
30 - 40 °C
30 - 40 °C
The p
work
All th
flashi
All th
befor
The w
enou
Only
funct
A lon