CHARGING THE EARPHONES
When the battery is low, earphones will play a short prompt to signal
they should be charged.
To charge the battery:
1. Connect the microUSB cable (provided) to earphones.
2. Connect the cable to an appropriate power source.
3. If cable was connected properly, then LED [4] will turn red.
4. Earphones are fully charged, when LED [4] turns blue.
VOICE ASSISTANT
If source device supports voice assistant functionality (Siri™, Google Now™)
and it is properly configured, it can be used by holding On [1] button for 2
seconds. Assistant will be heard in earphones and you will be able to give it
commands.
SAFETY INFORMATION
Use as intended.
Non-authorized repairs or disassembly voids the warranty and may
damage the product.
Dropping or hitting the device may lead to device being damaged,
scratched or flawed in other way.
Do not use the product in low and high temperatures, strong magnetic
fields and damp or dusty surroundings.
Improper usage may break the device.
GENERAL
The safe product, conforming to the EU requirements.
The product is made in accordance with RoHS European standard.
The WEEE symbol (the crossed-out wheeled bin) using indicates that this
product in not home waste. Appropriate waste management aids in avoiding
consequences which are harmful for people and environment and result
from dangerous materials used in the device, as well as improper storage
and processing. Segregated household waste collection aids recycle
materials and components of which the device was made. In order to get
detailed information about recycling this product please contact your
retailer or a local authority.
© NATEC. All rights reserved. NATEC name and logo, and all related product
and service names, design marks and slogans are the trademarks or
registered trademarks of NATEC. All other product and service marks
contained herein are the trademarks of their respective owners.
Frequency range: 2.4000-2.4835 GHz
Maximum radio-frequency power transmitted: 2.6 dBm
Hereby, IMPAKT S.A. declares that that the radio equipment type NSL-1337
is in compliance with Directives: 2014/53/EU (RED) and 2015/863/EU
(ROHS). The full text of the EU declaration of conformity is available at the
following internet address www.impakt.com.pl, at product tab.
EN