How To Operate; Clock Setting - ARIETE 953 Manual De Instrucciones

APPLIANCE DESCRIPTION (Fig. 1)
A Rotating ring
B Glass base
B Door handle
C Control panel
CONTROL PANEL DESCRIPTION (Fig. 2)
E Display
F "Microwave" button (microwave cooking)
G "Weight Defrost" button (Defrosting weight) / "Time Defrost" button (Defrosting time)
H "Clock / Preset" button (Clock setting)
I "Stop / Clear" button
L "Start / +30 sec. / Confirm" button
M
The microwaves are electromagnetic radiations that are also present in nature in the form of light
waves (e.g. sunlight) and that, inside the oven, go through food from any directions and warm up the
molecules of water, fat, and sugar. The heat is produced very quickly only in food, while the container
warms up only indirectly for heat transfer from hot food. This prevents the food from adhering to the
container, therefore it is possible to use very little fat or to avoid its use during the cooking process.
The microwave cooking is deemed to be very healthy and dietetic since it is low fat. Furthermore, in
comparison with the traditional systems, as cooking is at a lower temperature, the food dehydrates
less, does not lose its nutrients and preserves its flavour more.

HOW TO OPERATE

CLOCK SETTING

When the microwave oven is plugged in, the display (E) will show "0:00" and a "beep" will be emit-
ted.
- Press the button (H) "Clock / Preset" once; the hour indicator will start blinking.
- Rotate the dial (M) to increase or the decrease the values of hours (from 0 to 23).
- Press the button (H) "Clock / Preset", the minute indicator will start blinking.
- Rotate the dial (M) to increase or decrease the values of minutes (from 0 to 59).
- Press the button (H) "Clock / Preset" to confirm setting; the sign ":" will flash and the display (E)
will show the time set.
WARNING:
If the clock is not set, it will not work when the appliance is plugged in.
The clock setting does not remain stored if the appliance is unplugged.
If no operations are carried out for 1 minute during the clock setting process, the appliance
will go back to the previous settings automatically.
"Time" / "Weight" / "Auto Menu" dial (Time/Weight/Default menu setting)
- 13 -
EN