Controls And Connectors - Opalum Loevschall PERSEUS Manual Del Usuario

2. Controls and connectors

1. Power socket (DC input)
Connect the DC power supply to this connector..
2. Status indicator (LED)
Indicates the current status:
•
OFF – the system is in Standby or has no power
•
ON – the system is ON
•
Flashing – the system is in pairing mode
3. Bluetooth pairing button
Use this button to start the Bluetooth pairing process. You only need to pair devices that have not been paired with
the speaker before.
4. Service interface (next to the DC input)
This is used only during production. DO NOT CONNECT ANYTHING TO THIS CONNECTOR.
5
Loevschall PERSEUS
by Opalum
Owner's guide
Rev. 1.2