Poulan Pro PP446T Manual De Instrucciones página 7

Ocultar thumbs Ver también para PP446T:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Install required
shietd properly
before
using
the unit. Use t he metal shield for a ll m etal
Made use.
_'
WARNING:
Only use brushcutter
at-
tachments
that provide
a metal
shield
with
proboscis
nose.
FrOo OSS,S
• Use only specified
blade and make sure it is
properly
installed and securely
fastened,
• Cut from your left to your right.
Cutting on
the right side of the shield will throw debris
away from the operator.
• Always
use the handlebar
and a properly
adjusted shoulder strap with blade (see AS-
SEMBLY
instructions
in brushcutter
attach-
ment instruction
manual).
CULTIVATOR
SAFETY
_'
WARNING:
Rotating tines can cause
serious injury.
Keep away from rotating tines.
Stop the engine and disconnect
the spark plug
before unclogging tines or making repairs.
_,jiiji_iiiiii!i_i_!!_iiliii!i!_ii!iii!i!ii!i!iil!!i_,
iiI
A
411WARNING:
Inspect
the area to be
cultivated
before starting the unit. Remove all
debris
and hard and sharp objects
such as
rocks, vines,
branches,
rope, string, etc.
• Avoid heavy contact
with solid objects that
might stop the tines.
If heavy contact
oc-
curs, stop the engine and inspect the unit
for damage.
• Never operate the cultivator without the tine
cover in place and properly
secured.
• Keep the tines and guard clear of debris.
• After striking a foreign object, stop the engine,
disconnect the spark plug and inspect the cul-
tivator for damage.
Repair before restarting.
• Disconnect
attachment
from the drive en-
gine before cleaning
the tines with a hose
and water to remove any build-up.
Oil the
tines to prevent
rust.
• Always
wear
gloves
when
servicing
or
cleaning
the tines.
The tines become very
sharp from use.
• Do not run unit at high speed unless culti-
vating,
HEDGE
TRIMMER
SAFETY
,_DANGER:
RiSK
OF
CUT;
KEEP
HANDS
AWAY
FROM
BLADE
-
Blade
moves
momentarily
after
the trigger
is re-
leased.
Do not attempt to clear away cut ma-
teriai when the blade is in motion.
Make sure
the switch
is in the OFF position,
the spark
plug wire is disconnected,
and the blade has
stopped
moving
before
removing
jammed
material from the cutting blade. Do not grab or
hold the unit by the cutting blade,
Blades move
Allow blades to stop
momentarily
before removing
after the
them from the cut.
,_ WARNING:
Inspect the area before
starting
the unit. Remove
all debris and hard
objects
such as rocks, glass, wire,
etc, that
can ricochet,
be thrown,
or otherwise
cause
injury or damage
during
operation.
• Do
not use
a cutting
blade
that is bent,
warped, cracked, broken or damaged
in any
other way, Have worn or damaged parts re-
placed by your authorized service dealer,
• Always
keep
unit
in front of your
body,
Keep atl parts of your body away from the
cutting
blade.
• Keep the cutting blade and air vents clear of
debris,
SNOW
THROWER
SAFETY
,_WARNING:
Keep hands
and feet
away from the rotor when starting or running
the engine.
Never attempt to clear the rotor
with the engine/motor
running.
Stop engine
and disconnect
spark plug before unclogging
snow or debris from discharge
chute or when
adjusting
vanes.
_bWARNING:
Never
lean over
dis-
charge
chute.
Rocks
or debris
could
be
thrown into the eyes and face and cause seri-
ous injury or biindness.
Ag&WARNING:
inspect
the area where
the unit is to be used.
Remove
objects
that
could be thrown
or damage
the unit.
Some
objects
may be hidden by fallen snow - be
alert for the possibility.
• Direct material
discharge
away from glass
enclosures,
automobiles,
etc.
• Do not run engine at high speed while not
removing
snow.
• Be attentive
when using the snowthrower,
and stay alert for holes
in the terrain
and
other hidden hazards.
• Make sure the rotor will spin freely
before
attaching
the snowthrower
to the power-
head.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido