Transport And Storage - Wolf Garten 72V Li-ION POWER 30T Instrucciones De Funcionamiento Originales

Transport and storage

Replacing the line spool (Fig . O )
Risk of injuries due to the cutting tool.
¾ Only adjust the device with the motor
switched off and the cutting tool at a
standstill.
¾ Do not reach into the area of the rotating
line.
¾ Always remove the power pack prior to
working on the device.
Î Simultaneously strongly press both of the en-
gaging lugs of the spool cap together O 1 and
pull it off O 2 .
Remove the line spool O 3 .
Î
If necessary, remove any dirt.
Î
Î Thread the line ends of the new spool through the
eyes of the line box O 4 and insert the new line
spool in the line box O 5 .
Î Extend the line ends out of the spool fas-
tening O 6 .
Simultaneously strongly press both of the en-
Î
gaging lugs of the spool cap together and push it
on to the line spool until it engages O 7 .
WARNING !
Transport and storage
Risk of injuries due to the cutting tool.
¾ Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾ Remove the power pack before transport
or storage.
Storage
Thoroughly clean your device after every season.
Î
Î Always store the device in a dry and safe location
that is inaccessible to children.
Store the power pack and trimmer separately.
Î
Î Store the power pack in a cool and dry location.
Recommended storage temperature approx.
18 °C.
Î Keep the trimmer and especially its plastic com-
ponents away from brake fluids, petrol, mineral
oil containing products, penetrating oils etc. They
contain chemical substances that can damage,
attack or destroy the plastic components of the
trimmer.
Î Fertilizers and other garden chemicals contain
substances that may have a highly corrosive
effect on the metal parts of the trimmer. Therefore
do not store your trimmer in the vicinity of these
substances.
V LI-ION POWER
WARNING !
T |
EN
| 25