Uv Index Bar Chart Display; User Settings; Setting Skin Type And Spf - Oregon Scientific UVR138 Manual Del Usuario

UV INDEX BAR CHART DISPLAY

The UV index bar chart shows ultra-violet level patterns
taken over ten hours. Ultra-violet level readings are taken
hourly, averaged, and then displayed as an index.
Measurements are displayed in 2-hour increments
(-10, -8, -6, -4, -2, 0).
For example, (-10) indicates the average hourly reading
taken ten hours ago, (0) is the most current average.
Readings will show approximately one hour after you setup
the sensor.
1. Current ( 0 ) / ten hours ago ( -10 ) .
2. UVI \ Hr the average UVI index for a given hour.
3. indicates that you are in UV mode.
4. UV bar chart display is active.
NOTE
If the icon is not visible on the main unit bar
chart display box, press MODE to enter the bar chart
display.
UVR138 English R1 OP

USER SETTINGS

Under the same exposure to the sun, individuals will react
differently. To account for this difference, settings can be
customized for up to 4 users. This way, information is
tailored to each individual for more accurate results. For
example, if there is a mum, dad, sister, and brother in a
house, you can assign a user number to each person such
as mum (1), dad (2), sister (3), and brother (4).

SETTING SKIN TYPE AND SPF

8
8
1. Press SELECT to choose UV mode.
2. If the icon is not visible on the main unit UV
display box, press MODE to enter UV mode.
8/21/04, 11:05 PM