Technical Data; Electrical Safety; Safety In The Workplace; Personal Safety - STAMOS S-LS-62 Manual De Instrucciones

U S E R M A N U A L

TECHNICAL DATA

Parameter
Parameter value
description
Product name DIGITAL DIGITAL DIGITAL
SOLDERING SOLDERING SOLDERING
STATION STATION STATION
80W 100W 80W
Model S-LS-62 S-LS-63 S-LS-64
Rated
voltage [V~]/
230/50
Frequency
[Hz]
Power [W] 80 100 80
Temperature
150-450
range [°C]
Temperature
+/- 2%
stability
Accuracy of
temperature +/- 10
indications [°C]
Tip resistance
< 2
[Ω]
Rated current
0,4 0,5 0,4
[A]
Fuse 3A 1 A
Ground
potential on < 5 < 2
the tip [mV]
Protection
I
class
Protection
IP20
rating IP
Dimensions 115x145 115x173
[mm] x96 x100
Weight [kg] 1,73 2,48
Product name DIGITAL DIGITAL
SOLDERING SOLDERING
STATION 60W STATION 75W
Model S-LS-65 S-LS-68
Rated
voltage [V~]/
230/50
Frequency
[Hz]
Power [W] 60 75
Temperature
150-450 200-480
range [°C]
Temperature
+/- 2%
stability
Accuracy of
temperature +/- 15 +/- 10
indications [°C]
EN
Tip resistance
< 2
[Ω]
Rated current
0,3 0,54
[A]
Fuse 1 A
Ground
potential on < 2
the tip [mV]
Protection
I
class
Protection
IP20
rating IP
Dimensions 115x173x100 115x145x96
[mm]
Weight [kg] 1,83 1,81
Product name DIGITAL DIGITAL
SOLDERING SOLDERING
STATION 150W STATION 90W
Model S-LS-71 S-LS-72
Rated
voltage [V~]/
230/50
Frequency
[Hz]
Power [W] 150 90
Temperature
150-450 100-500
range [°C]
Temperature
+/- 2%
stability
Accuracy of
temperature +/- 10
indications [°C]
Tip resistance
< 2
[Ω]
Rated current
0,7 0,5
[A]
Fuse 2 A 1 A
Ground
potential on < 2
the tip [mV]
Protection
I
class
Protection
IP20
rating IP
Dimensions 125x155x112 115x173x100
[mm]
Weight [kg] 1,72 2,38
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
08.07.2020
10
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement.
LEGEND
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Wear protective goggles.
Wear a dust mask (respiratory tract protection).
ATTENTION! Electric shock warning!
ATTENTION! Hot surface, risk of burns!
Only use indoors.
Pb
Soldering with lead-free solder wire.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury or even death.
The terms "device" or "product" are used in the warnings
and instructions to refer to DIGITAL SOLDERING STATION.

2.1. ELECTRICAL SAFETY

a) The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes,
heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device
is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment.
Water getting into the device increases the risk of
damage to the device and of electric shock.
c) Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it
to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp
edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) Do not use the device if the power cord is damaged
and
or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or
the manufacturer's service centre.
08.07.2020
EN
f) To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.
g) ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
h) Do not use in very humid environments or in the
direct vicinity of water tanks.
i) Prevent the device from getting wet. Risk of electric
shock!

2.2. SAFETY IN THE WORKPLACE

a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d) If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
e) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
f) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g) Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
h) Use the device in a well-ventilated space.
i) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
j) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
k) Keep packaging elements and small assembly parts
in a place not available to children.
l) Keep the device away from children and animals.
m) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
REMEMBER! When using the device, protect
children and other bystanders.

2.3. PERSONAL SAFETY

a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c) When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d) Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
e) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
11