User Guide - VEFXi 3D-Bee Diamond Manual Del Usuario

USER GUIDE

3D-Bee Diamond Features and Specifications
There are four HDMI™ inputs
to connect devices such as
DVD/Blu-ray player, game
console, media player, PC, etc.
This converter supports side-
by-side and frame-sequential
formats of 3D video output.
The side-by-side 3D format is
the recommended format for
watching 3D output from the
converter on a 3D TV. For this
output mode, the input 2D
video must be at 720p, 1080i
or 1080p resolution with frame
rate between 24Hz and 60Hz.
Frame-sequential 3D format is the required input format by many 3D projectors. For
this mode, the 2D video input to the converter must be 720p at either 50Hz or 60Hz
frame rate. The output from the converter is at 720p video at a frame rate of 100 or
120Hz.
Video source devices that do not have HDMI outputs can be connected to the 3D-Bee
Diamond through third party adapter boxes. Please use the 3D glasses you have for
your 3D TV or 3D projector to
watch converted content.
Connecting your 3D-
Bee & 3D TV or 3D-
ready 720p projector
SET UP: Using a high speed
HDMI cable connect the 3D-
Bee HDMI OUT to the HDMI
IN port of your 3D TV or 3D
projector. Connect up to four
devices (such as a game con-
sole, DVD/Blu-Ray Player, PC,
Satellite/Cable Box, etc.) to the
HDMI IN ports at the back of
the 3D-Bee.
Red light: Power
power on On/Off
Blue light: Infrared
active 3D receiver
conversion zone
4 3
Four HDMI™ inputs
HDMI HDMI
IN 4 IN 3
3
1 2 3 4
Green lights:
active inputs
HDMI™
output
2 1
HDMI HDMI
IN 2 IN 1
HDMI
output
DC power
5V/1A
connector
DC power
5V/1A
connector