Technical Specifications; Problem Solving - Philips SCF250 Instrucciones De Manejo

8 ENGLISH
Maintenance
Cleaning
• Disconnect the Baby Bottle Warmer from the mains socket
and allow it to cool down. Clean the container and the
outside of the Baby Bottle Warmer with a damp cloth.
Notes: – Never immerse the Baby Bottle Warmer in water.
– Do not use cleaning or scouring agents.
Warning: If a fault occurs, consult a Philips' service centre. Under no

Technical Specifications

Power supply (mains):
Power consumption (mains):
Operational ambient temperature:
Protection:

Problem solving

Problem
Temperature too low.
Temperature too high.
circumstances should you try to repair the Bottle Warmer
yourself; do not dismantle. Servicing should be performed by
qualified service personnel only.
between +7°C and +37°C
PTC temperature controlled
Solution
• Turn the click-step control knob
4 to the right until the indicator
lamp lights up red to start the
heating up again.
• Check ring filling and start
temperature.
• Lower the adjustment setting.
• Check ring filling and start
temperature.
220-240V AC
250 Watts
heating system