Removing And Replacing The Doors - Kenmore 795.7940 Serie Manual De Uso

REMOVING AND REPLACING THE DOORS

WARNING
Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
TOOLS NEEDED
13
• 10mm or / -inch socket wrench
32
• (with 2-inch extension for bottom door hinge)
• No. 2 Phillips head screwdriver
• Flat-head screwdriver for prying
• Adjustable wrench
REMOVING THE FREEZER DOOR
Remove the top-hinge cover by gently prying it with a
head screwdriver.
Using either a 10 mm or 13 / 32 in. socket wrench, remove
the three bolts and lift
Carefully lift up the freezer door. Place the door on a
non- scratching surface.
Middle Hinge Bracket
the top hinge. Set parts aside.
Hinge Pin
REFRIGERATOR INSTALLATION
WARNING
Electrical Shock Hazard
• Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
serious injury or death.
• Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You
may be injured or receive an electrical shock.
REMOVING THE REFRIGERATOR DOOR
Loosen and remove the two bolts using a phillips head
screwdriver.
Remove the middle hinge bracket.
Carefully lift up the door. Place the door on a non-
scratching surface.
11
Middle
Hinge Bracket