Sanitaire Quiet Clean H-3480 Guía De Mantenimiento

π
H-3480
SANITAIRE QUIET CLEAN
®
INDUSTRIAL VACUUM
DAILY
1. Replacement Bag – Before each use, inspect
replacement bag and dispose of if 2/3 or more full.
Check cloth bag for any debris and clean out if
necessary.
2. Belt Condition – Check the belt for signs of wear.
Change the belt when it is loose or has cuts or
cracks. Refer to the diagram on the underside of the
base for proper installation of belt and brushroll.
3. Supply Cord and Plug – Check supply cord and
plug for any cuts or damage. If damaged, have the
supply cord and plug assembly replaced by the
Uline service team.
4. Motor – If there are unusual sounds or if poor
performance occurs, the motor should be inspected
immediately by the Uline service team.
WEEKLY
1. Cloth Dust Bag – Inspect the dust bag assembly for
any unusual wear. Replace bent clips, stretched
springs or a worn bag with genuine Sanitaire
replacement parts.
π
PAGE 1 OF 3 CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
ROUTINE MAINTENANCE
2. Brushroll Bristle Strips – Check the bristles for wear.
The bristle strips should be replaced when the
bristles are less than 1/4 inch in length.
3. Brush Roll Condition – Check for and remove any
loose material, such as string or hair wrapped
around the brushroll.
MONTHLY
1. Cleaning – Inspect and clean the vacuum,
including the fan chamber and under the hood.
2. Electrical – Inspect the cord assembly for wear and
check for proper handle assembly.
3. Handle – Check the handle assembly for tightness
and replace handle bolts if missing.
4. Motor – The Uline service team should make a
routine check of the motor every 6 months. Inspect
the motor immediately if there are any unusual
sounds or if poor performance occurs.
Para Español, vea página 2.
Pour le français, consulter la page 3.
0115 RH-3480