Kohler K-17492 Guia De Inicio Rapido página 3

To Shower Outlet
Handshower Hose
1. Install the Handshower
Run cold and hot water through the shower outlet to flush out
dirt and debris.
Insert the screen washer into the end of the inlet of the
handshower hose.
Thread the handshower onto the hose until hand-tight. Do not
overtighten.
Thread the hose onto the shower outlet.
Wrench tighten the hose to the shower outlet. Do not overtighten.
2. Installation Checkout
Turn on the shower valve (not shown).
Check for leaks at each end of the handshower hose and the inlet
of the handshower. Make any adjustments as needed.
Rotate the handshower face to verify smooth operation of the
spray options.
Turn off the shower valve.
Kohler Co.
Inlet
Handshower
Screen Washer
3 1111384-2-A