Technical Data - EINHELL GE-ST 36/40 Li E Manual De Instrucciones Original

Fresadora de nieve inalámbrica
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 101
The machine is not designed for the fol-
lowing:
Clearing away snow from unpaved paths and
areas (e.g. graveled areas or meadows).
Clearing away snow in large quantities and
heights, clearing away very wet snow, clea-
ring away packed snow and ice.
For commercial use (e.g. in public parks, in
sports facilities) and for use in agriculture and
forestry.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Operating voltage: .................................. 36 V DC
Protection type: ............................................IPX1
Protection class: ................................................III
Idle speed n
: ......................................1970 min
0
Idling speed min - max: .......... 1670 – 1970 min
Working width: ............................................40 cm
Height of snow max.: .................................. 20 cm
Ejection range max.: ..................................... 6 m
Sound pressure level L
Uncertainty K
: ...................................... 3 dB(A)
pA
Measured sound power level L
Uncertainty K
: ..................................... 3 dB(A)
WA
Guaranteed sound power level L
Vibration at the long handle a
Uncertainty K: ........................................ 1.5 m/s
Weight: ...................................................... 6.5 kg
Caution!
The machine is supplied without rechargeable
batteries and without a charger, and is allowed to
be used only with the lithium-ion batteries of the
Power-X-Change series!
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Anl_GE_ST_36_40_Li_E_SPK13.indb 18
Anl_GE_ST_36_40_Li_E_SPK13.indb 18
-1
-1
: .................. 78.6 dB(A)
pA
: .... 89.85 dB(A)
WA
: ...... 92 dB(A)
WA
: ........... 0.812 m/s
2
h
2
- 18 -
GB
The machine noise might exceed 85 dB (A). The
operator will require noise protection measures if
this is the case.
The stated vibration emission levels and the
stated noise emission values were measured in
accordance with a set of standardized criteria
and can be used to compare one power tool with
another.
The stated vibration emission levels and the sta-
ted noise emission values can also be used to
make an initial assessment of exposure.
Warning:
The vibration and noise emission levels during
actual use may vary from the values quoted,
depending on the way in which the electric tool is
used and, in particular, on the type of snow being
processed.
Caution!
The vibration value changes according to the
area of application of the electric equipment and
may exceed the specifi ed value in exceptional
circumstances.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
Damage to hearing if no suitable ear protec-
tion is used.
Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Beware of injury caused by reaching into the
running cutter drum.
Beware of injury to persons and damage to
11.06.2021 08:39:53
11.06.2021 08:39:53

Publicidad

Tabla de contenido
loading

Tabla de contenido