Troubleshooting - Wilfa CGWS-130B Manual De Instrucciones

TROUBLESHOOTING

EN
If the appliance stops working, you can investigate the cause as follows. If the
problem persists, please contact your dealer or an authorised service workshop.
Problem
Coffee grinder
does not
operate when
the start switch
is on.
High-pitch
sound, beans
not fed into
appliance; does
not produce
ground coffee
INSTRUCTION MANUAL · CLASSIC AROMA/SAVOUR
Possible causes
The plug is not plugged in
properly.
The mains supply voltage
does not correspond to the
standard for input supply.
The bean cup is not inserted
correctly and the grinding
level is not set; points to
"OFF".
Cup for freshly ground coffee
is not inserted correctly.
The grinding time has not
been set; timer points to "0".
The motor stops due to
overload
The grinder is stuck
Solution
Push the plug in properly.
Check that the mains supply
is 220 - 240 V.
Reinsert the bean cup and
set the grinding level by
turning to the right.
Insert the cup for freshly
ground coffee in the
appropriate position.
Rotate the timer button to
set the grinding time.
Contact your dealer or a
technician for repair or
replacement of the appliance
Switch off the machine and
take out the coffee beans.
Check to see whether any
hard matter has been mixed
in with the coffee beans,
and check for damaged
components
10