G.SKILL KM570 RGB Guia De Inicio Rapido página 2

Introduction
Congratulations! You are the proud owner of the G.SKILL RIPJAWS KM570 series mechanical
gaming keyboard, designed with simplicity and fully packed with features.
Features
Cherry MX mechanical keyswitches
•
Full n-key rollover & 100% anti-ghosting keys
•
Per-key lighting & customizable lighting effects
•
Function combo keys
•
Dedicated volume control
•
On-the-fly macro recording & per-key macro support
•
Gaming mode Windows key lock
•
Braided USB cable design for durability and style
•
Five levels of ergonomically contoured keycaps
•
Technical Specifications
Model Number
Key Type
Illumination
On-board Memory
Polling Rate
Rollover
Cable Length
Warranty
Package Contents
G.SKILL RIPJAWS Series KM570 RGB Mechanical Gaming Keyboard
•
Keycap Puller Tool
•
Quick Start Guide
•
Warranty Guide
•
System Requirements
Windows 7, 8, 8.1, 10
•
USB port
•
Installation
1. Turn on your computer.
2. Connect the keyboard USB connector to a USB 2.0 or USB 3.0 port.
3. Wait for the system to detect and install the basic device drivers.
4. Go to www.gskill.com and download the G.SKILL Unified Driver System.
5. Install the driver software suite by following the onscreen instructions.
6. Your keyboard is ready to use!
1 | ENGLISH
KM570 RGB
Cherry MX Mechanical
RGB
Yes (1 Profile)
1000Hz (1ms)
n-Key Rollover & 100% Anti-Ghosting
2.0m, Braided
2 Year Limited Warranty
Keyboard Hardware
2
1. "Fn" key
2. Function combo keys (use with "Fn" key)
3. Volume control keys (Mute / Volume Down / Volume Up)
4. NumLock/Caps Lock/Scroll Lock/Windows Lock key indicator lights
5. On-the-fly macro recording key ("MR" key)
6. Lighting brightness control (use with "Fn" key)
How to Toggle NKRO
N-key rollover (NKRO) is a function that allows multiple keys to be pressed and registered
simultaneously. Typically, USB keyboards support 6-key rollover by default, so when a 7th
key is pressed, it would not be registered. In some legacy software environment or BIOS
environment, only the default 6-key rollover is supported, so n-key rollover function would
need to be disabled.
On the KM570, n-key rollover is enabled by default. To toggle between NKRO and 6-key
rollover, press "Fn + F6".
4
3
1
6
ENGLISH | 2
5