SCHOTT EasyLED Manual De Instrucciones página 24

EasyLED - Operating Instructions
Transmitted Light Stage
7 1 8 9
Insert the barrel connector (1) of the power supply (F) into the DC socket provided on the
Transmitted Light Stage (B). The plug connection of the power supply is interchangeable for
the EU, UK, US and AU. The plug connection needs to be connected to the mains supply
(100-240 V AC, 50-60 Hz).
Position or attach the Transmitted Light Stage (B) in the notch provided on the microscope
stand so that the green control light (9) is facing the user. The basic version of the
Transmitted Light Stage (B) has a diameter of 84 mm. To connect stands with different notch
diameters, Transmitted Light Stages with correspondingly matched adapter feet are available
(see point 7 of these operating instructions).
Switch on the Transmitted Light Stage (B) by flicking the switch (8) and set the required
brightness by adjusting the thumb wheel (7). The green indicator light (9) will be on when the
instrument is switched on.
10/13