DISMANTLING THE COFFEE UNIT
It may be necessary to clean the unit if a pod is trapped.
To clean the unit, stop and unplug the machine, set the machine switch (no. 8) to the O position, remove the machine cover
(see photos) and release the unit by pulling the bolt towards you.
Rotate the unit anti-clockwise.
Reverse this procedure to refit the unit.
Important: if you forget to fit the bolt in the unit, you will not be able to close the cover, and the safety device will prevent you
from refitting the cover (no. 1).
TO REMOVE THE MACHINE COVER:
Raise the handle (no. 2) to maximum, while pressing the two
silver-plated handle discs simultaneously, pull the cover (no. 1)
upwards
16