USE OF THE CHRONOGRAPH
The chronograph function can only be used when the crown is
in position 1 or 2.
Start
Press push-button A to activate the seconds hand of the chrono-
graph. If the timed activity lasts longer than 60 seconds, the time
elapsed will next appear on the minutes counter and after a further
30 minutes on the hours counter.
Stop
Press push-button A a second time to stop the chronograph and
obtain the time that has elapsed (in hours, minutes and seconds).
By pressing push-button A again, timing restarts immediately. Thus
you can measure several consecutive time-durations.
14
PUSH BUTTON A:
START
STOP
PUSH BUTTON B:
ZERO RESET