BTI MH 5 BOX Manual Del Usuario página 17

HEAVYDUTY CHIPPING HAMMER
MH 5 BOX
Congratulations!
You have chosen a BTI tool. Years of experience, thorough
product development and innovation make BTI one of the most
reliable partners for professional power tool users.
Technical Data
Voltage
(U.K & Ireland only)
Type
Frequency
Power Input
No-load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Collar diameter
Weight (including handle)
Noise and vibration total values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
MH 5 BOX
V
AC
V 230/115
AC
Hz
W
bpm
J
SDS-Max
mm
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Chipping Hammer
MH 5 BOX
230
BTI declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
1
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
50
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
1050
Nü rnberg, Germany, Notified Body ID No.: 0197.
3150
Level of sound power according to 2000/14/EC
7.1
(Article 12, Annex III, No. 10; m ≤ 15 kg):
L (measured sound power level)
WA
76
L (guaranteed sound power level)
WA
5.6
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact BTI at the
following address or refer to the back of the manual.
94
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of BTI.
105
3
8.5
Andreas Krebs
Managing Director
1.5
BTI Befestigungstechnik GmbH & Co.KG
Salzstraße 51
74653 Ingelfingen
01.04.2018
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
dB
dB
ppa. Martin Mayer-Hagelstein
Director Marketing & E-Commerce
ENGLISH
100
103
17