Highland MC-K03A Manual De Instrucciones página 6

1. Plug the appliance into its own grounded outlet. If the electric circuit is
overloaded with other appliance, the Brewer may not function properly.
2. Water quality varies from place to place. For the best tasting gourmet coffee, we
recommend using bottled or filtered water.
3. De-scale the Brewer regularly. Please see the Cleaning and Maintenance
section for instructions.
Unpacking :
1. Place the Brewer box on a large steady surface (such as a table or countertop)
or on the floor. Open and turn the box on its side with front of box face down.
2. Reach into the box, carefully grasp and pull the plastic bag out of the box.
Remove the cardboard packaging on both sides of Brewer.
3. Lift plastic bag off Brewer, remove tape holding Water Tank and Brewer head in
place.
Warning: Save all packing materials in case future necessary. Keep all plastic
bags away from children.
Set-up & First brew :
Note: Before using the Brewer, please follow the instructions below. The Brewer
will not function properly unless these steps are followed.
1.Fill Water Tank with bottled or filtered
water, and make sure the water level is
higher than the "MIN" line, and does not
exceed the "Max" fill line.
Important: The temperature of the added
water should be below 95˚F. For great
taste, we suggest to use 77˚F water. And,
if the water lever is lower than the "MIN"
line, the brew button will be flashing
speedily as warning.
6