Cleaning And Maintenance - Highland MC-K03A Manual De Instrucciones

CLEANING AND MAINTENANCE

Regular cleaning of the Brewer's external components is recommended.
1. Never immerse the Brewer in water or other liquids. The housing and other
external components may be cleaned with a soapy, damp, non-abrasive cloth.
2. The cup tray should be periodically inspected and clean by cloth.
Cleaning the cartridge
The Cartridge can be placed onto the top shelf
of a dishwasher. After cleaning, simply insert
the cartridge back; be sure the cartridge is
firmly in place.
Note: Use low temperature cycles in the
dishwasher.
Cleaning the exit needle
The exit needle is located on the inside bottom
of the cartridge.Should a clog arise due to coffee
grinds, it can be cleaned using a paper clip or
similar tool. Remove cartridge, insert the paper
clip into the needle to loosen the clog and push
it out.
Caution: There are sharp needles that puncture
the portion pack above the cartridge and in the
bottom of the cartridge. To avoid risk of injury,
do not put your fingers in the cartridge.
9