Milwaukee 48-22-8586 Manual Del Operador página 4

Installing the Bumpers
Attach the bumpers using two screws (GG) per
bumper. Do not overtighten the screws.
Installing the Shelves
For each shelf, place four shelf mounting clips, with
the clips facing upward, at level height into the locker
mounting rail slots. Insert shelf into locker (1) and
fully seat onto shelf mounting clips (2).
Installing Magnetic Holder for Power Strip
Place magnetic holder in desired location while
considering cord management.
Power strip is not included. When connecting the
Locker to the right side of an existing MILWAUKEE
steel storage unit, the power strip must be removed
from the storage unit and can be placed into the
magnetic holder included with Locker.
GG
2
1
Installing Cord Bracket
Install cord brackets in desired location using two
bolts (HH) per bracket while considering cord man-
agement.
HH
Installing Door Storage Bins
Place each bin into the door mounting rail slots at
the desired level height.
Reversing the Locker Door
Two people may be required to
CAUTION
complete installation.
The Locker Door is reversible to accommodate both
left and right side orientations.
1. Remove door storage bins from door interior.
2. Remove door from locker by removing the screws
in the hinge. Flip door and resinstall hinge on
right side.
3. Remove logo plate and the two black plastic plugs,
flip, and reinstall.
4. Remove lock cylinder, flip, and reinstall.
5. Reinstall storage bins.
4