OBJ_BUCH-564-009.book Page 15 Monday, December 15, 2014 3:33 PM
The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
Maintenance
Remove battery before adjusting or cleaning, and be-
fore leaving the machine unattended for any period.Al-
ways wear gardening gloves when handling or working
near the sharp blades.
Examine the machine and replace worn or damaged parts
for safety.
Always lubricate the cutting blade with protective spray
before storage.
Keep all nuts, bolts and screws tight to be sure that the ma-
chine is in safe working condition.
Ensure replacement parts fitted are Bosch approved.
Always lubricate the cutting blade with protective
spray before use.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
Technical Data
Cordless Hedgecutter
Article number
No-load stroke rate
Cutting length
Cutting width
Weight according to EPTA-Procedure 01/2003
Serial number
Battery
Article number
– 1.3 Ah
– 1.5 Ah
– 2.0 Ah
Rated voltage
Bosch Power Tools
symbols and their meaning. The correct interpretation of the
symbols will help you to use the garden product in a better
and safer manner.
Symbol
Meaning
Reaction direction
Movement direction
Wear protective gloves
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Accessories/Spare Parts
Intended Use
The machine is intended for cutting and trimming hedges and
bushes in domestic use.
AHS 48 LI
3 600 H49 0..
-1
min
1100
mm
480
mm
kg
2.2
See serial number (type plate) on the machine
Li-Ion
2 607 336 039
2 607 336 207
2 607 336 921
V=
English | 15
AHS 52 LI
3 600 H49 0..
1100
520
15
15
2.3
Li-Ion
2 607 336 039
2 607 336 207
2 607 336 921
18
18
F 016 L81 255 | (15.12.14)