Intended Use - Bosch UniversalGrassCut 18V-26 Manual Original

onment. There is a risk of fire due to the charger heating
up during operation.
Do not cover the ventilation slots of the battery char-
u
ger. Otherwise, the battery charger can overheat and no
longer operate properly.
For increased electrical safety, we recommend using a re-
u
sidual current device with a max. tripping current of 30
mA. Before using, always check your residual current
device.
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
Symbol Meaning
Wear protective gloves
Movement direction
Reaction direction
Weight
Switching On
Switching Off
Permitted action
Prohibited action
Audible noise
Accessories/Spare Parts
Recommended position for grass cutting
Recommended position for edge trim-
ming
Recommended position for cutting under
bushes
Bosch Power Tools

Intended Use

The garden tool is intended for domestic use, for trimming
grass, weeds and nettles. It is designed for trimming grass
growing on slopes, under obstacles and lawn edges that can-
not be reached by the lawn mower. The garden tool is not
designed for use as a brush cutter. The garden tool is not in-
tended for commercial or industrial use.
Deliver scope (see figure B)
Carefully remove the machine from its packaging and check
if the following parts are complete:
– Grass trimmer
– Protection guard
– Wheel
– Battery**
– Charger**
– Original instructions
When parts are missing or damaged, please contact your
dealer.
** country specific
Product Features (see figure A)
The numbering of the product features refers to the illustra-
tion of the product on the graphics pages.
(1) Battery unlocking button
a)
(2) Battery
(3) Folding handle
(4) Foot pedal for adjusting the working angle for lawn
trimming/edge cutting
(5) Protection guard
(6) Wheel
(7) Handle-adjustment release
(8) On/Off switch
(9) Lock-off button for On/Off switch
(10) Button for adjustment of the working height
(11) Lever
a)
(12) Charger
(13) Spool cover
(14) Spool
(15) Hole for line wind-up
(16) Clamping ring
(17) Hook for threading-in the cutting line
(18) Slot for line guiding
(19) Hole for line guiding
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 17
F 016 L94 460 | (21.07.2022)