Tabla de contenido
Publicidad
OBJ_BUCH-2617-001.book Page 11 Thursday, August 6, 2015 9:55 AM
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
Service
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
Safety Warnings for Sander
Use the machine only for dry sanding. Penetra-
tion of water into the machine increases the risk
of an electric shock.
Caution, fire hazard! Avoid overheating the ob-
ject being sanded as well as the sander. Al-
ways empty the dust collector before taking
breaks. In unfavourable conditions, e. g., when
sparks emit from sanding metals, sanding debris
in the dust bag, micro filter or paper sack (or in
the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remain-
ders of varnish, polyurethane or other chemical
materials and when the sanding debris is hot af-
ter long periods of working.
When working with the machine, always hold
it firmly with both hands and provide for a se-
cure stance. The power tool is guided more se-
cure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Products sold in GB only: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fitted
in its place by an authorised customer service
agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
1 609 92A 1D6 • 6.8.15
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in
electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Auxiliary handle (insulated gripping surface)
2 Screw for auxiliary handle
3 Thumbwheel for orbit frequency preselection
4 On/Off switch
5 Lock-on button for On/Off switch
6 Dust bag
7 Hex key
8 Sanding-sheet clamp
9 Sanding plate
10 Clamping bracket
11 Handle (insulated gripping surface)
12 Sanding sheet
13 Vacuum hose*
14 Extraction adapter*
15 Extraction outlet
16 Plastic slider
17 Perforating tool*
18 Screws for sanding plate
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
English | 11
Publicidad
Tabla de contenido
