Changing Fm Stations; Using Radio Presets; Using The Bt Input; Setting Alarms And Timers , Snooze Function - Audizio Monza Manual De Instrucciones

3. Press the [ ] or [ ] button or [OK/VOLUME] dial to select your favorite radio station.
4. Press the [OK/VOLUME] button to listen to your favorite radio station
Seek tuning
1. Press the [MODE] button several times to Select 'FM radio'.
2. Press the [ ] or [ ] button FM radio station that has a strong signal.
You can store up to 30 digital radio and 30 FM radio stations for quick access.
To store a station to the preset list:
1. Tune to the digital or FM radio station you want to store.
2. Hold the [PRESET] button for at least 4 seconds to view the numerical list of stored presets, then turn and press the
[OK/VOLUME] dial to choose any Preset number between 1 and 30. You can overwrite existing presets.
To recall a preset when listening to digital radio or FM radio
Push the [PRESET] button, turn the [OK/VOLUME] dial right or left to scroll through the list of presets, then push and release
the [SELECT] dial to tune to the selected preset.
1. Make sure the DAB Radio has been switched on. Press the MODE button to select BT mode, and the display will show "BT
Disconnected".
2. Enable BT on your Smartphone and search for BT connections, select "Audizio Monza" from the list of devices. If you are
asked for a pass code enter "0000".
3. When successfully paired, the display will show "BT Connected".
4. Once you have paired the DAB Radio with a smartphone or BT device, it will remember this device and will pair
automatically when the device's BT is activated and in range, you do not need to re-pair any previously connected devices
under BT mode.
5. The DAB Radio will attempt to automatically connect to the last device it was paired with if BT mode is turned on. If you
want to pair it with a new device, please press the OK/Volume dial until the display shows "Disconnected" and then use your
new device to search and select the pairing name.
Setting an alarm
1. Press and hold the [MENU] button to view the main menu and select 'System'.
2. Turn and press the [OK/Volume] dial to select 'Alarm'.
3. From the 'Alarm' menu, turn and press the [OK/Volume] dial to select either 'Alarm 1' or 'Alarm 2'.
4. Select Alarm 'ON of OFF' by turning and pressing the [OK/ VOLUME] dial, turn the dial to adjust the hours and minutes,
pressing [OK/Volume] to confirm each section.
5. Select frequency Once,daily,weekdays,weekend.by turning and pressing the [OK/Volume] dial, turn the dial to adjust
the hours and minutes, pressing [OK/ VOLUME] to confirm each section.
6. Set the source by turning and pressing the OK/Volume] dial, turn the dial to adjust Buzzer,DAB or FM, pressing [OK/
Volume] to confirm.If you've chosen 'DAB' or 'FM' radio, turn and press the [OK/Volume] dial to select 'Preset'. To play
the station you last listened to, turn and press the [OK/Volume] dial to select 'Last listened' or turn and press the
[OK/Volume] dial to choose a radio station from the preset list.
7. Turn and press the [OK/ Volume] dial to select 'Volume'. Turn and press the [OK/ Volume] the dial to set the volume of
the alarm.
8. Turn and press the [OK/ Volume] dial to select 'Duration'. Turn and press the [OK/ Volume] to set the duration that the
alarm will sound in minutes
7