Cleaning And Maintenance - Aspes ACE648 Serie Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning
 Before maintenance and cleaning operations, you should remove the power
cable from the socket or switch the hood off.
 External surfaces of the hood should be wiped with a cloth damped with soap
water.
 Do not use corrosive and dangerous chemical materials.
 Be careful that water or similar substances should not contact with the
electronics.
 For products made of stainless sheet, use of commercially available
maintenance and cleaning agents for stainless product will ensure your product
to serve longer.
 Aluminum cartridge filters are washable in the dishwashing machines.
 Aluminum cartridge filter should be washed one in several months (after each
40 operating hours in average) depending on frequency of use with hot soapy
water or, if possible, individually in the dishwashing machine (maximum 60°C).
 After washing, aluminum cartridge filter and its frame may discolour. This is
normal and does not affect function of the filters.
 Remove the aluminum cartridge filter by pushing the spring catch at the end.
After cleaning, allow it to dry. Do not put in un place before it gets dry
(Figure 10)
Note: The illustration is a reference image, your device may differ.
*
If you desire to replace aluminum cartridge filter, consult to the nearest authorized
service centre to get it. For this purpose, you should state the version number written on
the nameplate of your product. Filters for other brands and versions commercially
available are not compliant with your product.

CLEANING AND MAINTENANCE

Figure 10
EN

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido