Kenwood BLP60 Manual Del Usuario página 7

G
Select one of the 3 pre-
programmed buttons. When the
required programme button is
pressed the light on the other
button will go out. The blender will
switch off automatically at the end
of the pre-set time. If you wish to
stop before the pre-set time, press
the selected programme button
again.
G
Select a speed between 'Min' to
'Max' by turning the speed control.
At the end of blending return the
speed control to "O" OFF before
removing the blender.
G
Do not remove the goblet until the
blades have stopped rotating and
the speed control is in the "O" OFF
position.
G
(P) Pulse – operates the motor in a
start/stop action. The pulse will
operate for as long as it is held in
position.
Refer to the troubleshooting
section if you experience any
problems with the operation of
the blender.
hints
G
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep
your hand over the opening. For
best results empty regularly.
G
The processing of spices is not
recommended as they may
damage the plastic parts.
G
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole
in the lid.
G
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
7