Descargar Imprimir esta página

ARENDO 305591 Manual Del Usuario página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

7. Turn the temperature regulator to the desired position. The
hotplate switches on.
8. As soon as you have finished cooking, turn the temperature
regulator back to the minimum (min) and disconnect the mains
plug from the socket.
6. Temperature setting
You can adjust the temperature of the hotplate using the tempera-
ture regulator.
7. Cleaning and Care
Please make sure that the appliance is disconnected from the pow-
er supply and switched off before you start cleaning. Please allow
the appliance to cool down for at least 30 minutes after use before
cleaning.
The appliance is not designed to be disassembled by an inadequate-
ly qualified technician.
Clean the product only with a slightly damp, soapy cloth. Make sure
that the cloth is sufficiently dry so that no standing water remains.
After wiping with the soapy cloth, dry the surface with a dry paper
towel. Do not use abrasive cleaning agents.
8. Safety instructions and disclaimer
Please do not try to open the appliance to carry out repairs or mod-
ifications. Avoid contact with the mains voltage. Do not short-circuit
the product. The appliance is not waterproof, hence please use it
only in dry surroundings. Protect it from high humidity, water and
snow. Keep the appliance away from high temperatures.
Do not expose the appliance to sudden changes in temperature or
strong vibrations, as this could damage the electronic components.
Check the appliance for any damage before using it. The appliance
should not be used if it was subject to impact or has been damaged
English
19

Publicidad

loading