August WP200 Manual De Instrucciones página 4

5. Operations
5.1 Windows Installation
Plug the USB receiver into a USB port on your computer.
The system will automatically search for the new hardware
and complete the installation.
Once installed, switch on the WP200 is ready to use.
5.2 Functions
Basic Use
■ Air mouse
- Press and hold to active and use the WP200 as
an air mouse
- Press as a left click
■ Slideshow Control
- Next slide: Press
- Previous Slide: Press
- Blank Screen (PowerPoint): Press and hold
- tart / End Slideshow: Press and hold
- Hyperlink: Press (Move the pointer over the link first)
■ Tasks Switching
- Press and hold the Tab button to switch between tasks /
Windows. Point the WP200 upwards to change the task
forward, point the WP200 downward to change the task
backward.
- 3 -
Advanced Use
Please note the presentation software is required for
advanced use. For more information of the software, please
refer to section 5.3.
The advance use contains all basic use function with the
addition of the highlight pointer mode.
Once the software is running, the air mouse will activate the
selected highlight pointer mode.
- Press (Multi-Function Button) twice to change between
the available highlight pointer mode: spotlight, magnifying
and on-screen laser mode.
- Press and hold to use the selected mode.
- While using one of the highlight pointer modes, press
or to adjust the size of the pointer.
5.3 Presentation Software
The presentation software is integrated in the USB receiver.
Some features can only be used while the software is
running.
1. Insert the USB receiver into a USB port.
2. Find and open the new USB drive in 'My Computer' on
Windows 7 or 'This PC' on Windows 8/10.
3. Launch the 'PresenterH100' application.
- 4 -