HOW TO PREPARE AND USE THE EQUIPMENT:
•
Check that the equipment is completely clean, the power knob is in the OFF
position, and that the power cord is not connected to the power outlet.
•
Gently remove the water tank from the base.
•
Unscrew the cap on the underside of the tank. Fill the water tank leaving
approximately ¼" of space from the rim when the tank is upside down.
•
Do not fill water all the way to the rim.
•
Screw the cap back on and fit the water tank, right side up, back into the base of
the unit, making sure it is properly secured in place.
•
Connect the equipment to a power outlet.
•
Use the mist regulation knob to turn the unit ON by moving the knob clockwise.
•
The night light illuminates when the unit is ON and vapor will start to exit.
•
Use the mist regulation knob to control the amount of vapor flow desired.
•
To turn the unit OFF, turn the knob counterclockwise. The night light will turn off
when the unit is OFF.
•
When the water tank is empty, the humidifier stops automatically.
5