memorex MT2206 A Serie Manual De Instrucciones página 34

STEREO AND SEPARATE AUDIO PROGRAM (SAP)
The TV is equipped with a feature known as Multi-channel TV
Sound or MTS. MTS broadcasts greatly enhance TV viewing
by bringing you programs with high fidelity stereo sound.
MTS also provides an extra channel called the Separate
Audio Program or SAP which broadcasters can use to
transmit a second language for bilingual transmission or for
other purposes.
LISTENING TO STEREO SOUND
When the TV is turned on or a channel selection is made,
make certain that the word "STEREO" appears on the
screen. This means that "Stereo" broadcasting is available.
You can enjoy stereo sound from the left and right speakers.
• When the "Mono" broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear stereo
sound is not available, press the AUDIO SELECT button
to change to mono sound. The noise should be eliminated.
Press it again to return to the stereo sound.
SOUND ADJUSTMENTS
Sound controls are factory preset but you can adjust them
individually as follows:
To display sound adjustments on the screen, press the
MENU button. Press the SET + or – button to select the AUDIO
option, then press the ENTER button.
BASS
Press the ENTER button until "BASS" appears on the screen,
then press the SET + or – button to adjust the bass sound.
TREBLE
Press the ENTER button until "TREBLE" appears on the screen,
then press the SET + or – button to adjust the treble sound.
ADJUSTING PICTURE
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
1
Press the MENU button.
2
Press the SET + or – button until the indicator next to
"PICTURE" begins to flash, then press the ENTER
button.
3
Press the ENTER button repeatedly to select the item
you want to adjust.
BRIGHTNESS CONTRAST
10
3L70901A-E
All manuals and user guides at all-guides.com
COLOR TINT SHARPNESS
10
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)
When the TV is turned on or a channel selection is made,
make certain that the letters "SAP" appear on the screen.
This means that the "Separate Audio Program" broadcasting
is available.
TO SELECT DESIRED SOUND
Press the AUDIO SELECT button to select the desired sound.
MONO+SAP BROADCASTING
MAIN SOUND
SAP SOUND
(MONO)
STEREO+SAP BROADCASTING
MAIN SOUND
(STEREO)
MAIN SOUND
(MONO)
BALANCE
Press the ENTER button until "BALANCE" appears on the
screen, then press the SET + or – button to obtain an equal
sound level from both speakers.
RESET
Pressing the RESET button while making sound
adjustments will return all adjustments to the factory
preset levels.
NOTE:
The on-screen display will disappear 6 seconds after
finishing an adjustment. The settings can only be
adjusted when they are displayed on the TV screen.
4
Press the SET + or – button to adjust the setting.
+
increase brightness
BRIGHTNESS
increase contrast
CONTRAST
brilliant color
COLOR
greenish color
TINT
makes picture clearer
SHARPNESS
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on-screen.
5/3/02, 6:54 PM
MAIN + SAP SOUND
(MONO)
SAP SOUND
MAIN + SAP SOUND
(MONO)
–
decrease brightness
decrease contrast
pale color
reddish color
makes picture softer