Tabla de contenido
Publicidad
Pour trouver les précautions de sécurité en français, reportez-vous à la page 40.
Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD7200
mkII. They show safe and correct ways to handle the product so as to prevent personal injury to you, others
and to avoid property damage.
Before reading through the manual, take time to read through and learn the important information listed in this
section.
This sign indicates a situation in which incorrect handling or disregard of this sign
Warning
might result in death or serious personal injury.
This sign indicates a situation in which incorrect handling or disregard of this sign
Caution
might result in personal injury or may result solely in damage to property.
Please read all materials such as manuals and warranties that have come with the product.
Eclipse will not be liability for unsatisfactory product performance due to failure to follow these instructions.
Warning
•
Do not modify this system for use other than that specified herein. Also, do not deviate from the
installation procedures described herein; Eclipse will not be held liable for damages including, but not
limited to serious injury, death or property damage resulting from installations that enable unintended
operation.
•
This main unit requires 12V DC and should only be installed in a vehicle with a 12V negative ground
the vehicle.
•
Never install this main unit where it will interfere with safe operation of the vehicle. Never block the
drivers' view. Do not install main unit where it may interfere with operation of the brakes, the steering
or any safety main unit, including seat belts and air bags.
•
Before drilling holes in a vehicle for installation, you must confirm the locations of pipes, tanks,
electrical wiring, and other vehicle systems and components to ensure that there will be no interference
or contact. In addition, you must also apply rust prevention and leak prevention measures at the drilling
•
•
and damage to vehicle wiring and the main unit you are installing.
•
brake pedal, gear shifter and steering. Position wires so that they will not be rubbed, abraded, or
damaged by moving vehicle components, including power seats.
•
connection uninsulated. Always install supplied fuses, circuit breakers, and relays.
38
II
Warning
•
Air bags are vital safety main unit. Never install main unit in a way which will alter air bag wiring or
interfere with air bag deployment. Air bags must function properly in the event of an accident.
•
When installation is complete, test all vehicle electrical systems for proper operation, including lights,
•
For your protection, never use a power drill without safety glasses or goggles. Debris or broken drill
bits may cause severe eye injuries, including blindness.
•
•
batteries. If a battery is swallowed, seek medical attention immediately.
•
When vehicle is moving, never take your eyes off the road to make adjustments to the main unit. You
must pay attention to the road to avoid accidents, do not let the operation or adjustment of the main
unit distract you from proper vehicle operation.
•
The driver should not look at the screen while driving. Accidents may result if you are not paying
attention to the forward direction.
•
•
•
result.
•
if the remote control makes its way under the foot pedals etc. when the vehicle is stopped or when it
goes around a corner.
•
may result.
•
Always replace fuses with fuses of identical capacity and characteristics. Never use a high capacity
•
If foreign objects or water enters the main unit, smoke comes out, or there is a strange odor, stop using
in these conditions.
•
•
Plastic bags and wrappings may cause suffocation and death. Keep away from babies and children.
Never put bag over your head or mouth.
Publicidad
Tabla de contenido
