Informative Labels - Inoxtrend ER304-USPE Instrucciones Para La Instalación, Uso Y Mantenimiento

During moving and installation of the oven, the installer must comply with accident-prevention regulations in force at
the place of installation (use of safety shoes, gloves, etc.) Remove the packaging taking care not to damage the oven.
The adhesive film, that protects the surfaces made of stainless steel can be removed also after you have positioned
the oven on the corresponding stand or the support surface.
ATTENTION: Packaging materials and adhesive film are potentially dangerous.
For this reason, they must be kept out of the reach of children and properly disposed of in com-
pliance with local directives.
You should separate packaging materials (wood, cardboard, plastic...) and dispose of them sepa-
rately, in compliance with directives in force at installation site.
Note: Take the protective film off the stainless steel parts by hand before starting the appliance.
Do not use abrasive substances and/or metal objects.
Clear any adhesive residues using a sponge soaked in solvent.
If the oven is heated up before removing the adhesive film, the removal of the film and cleaning of residues of glue will
be much more difficult.

1.4 INFORMATIVE LABELS

On each oven there are applied some metal labels, that give important info concerning characteristics of the oven,
electric and plumbing connections and eventually the drain connection.
4 x 2/3 GN - 4 x 460x340 - 4 x 60x40 / DIGITAL
On the right hand side panel there is the label A.
The info contained on this label are:
• Name and address of the manufacturer
• Oven model
• IPX protection grade against water jet.
• Conformity to EC directives.
• Power input and power supply (single or three phase).
• Serial number of the oven
• Symbol of European Directive 2012/19/UE
Removing the back side panel, on the oven chassis you find label B.
On this label the serial number of the oven is repeated.
In this way, the customer or the installer can find the serial number of the oven also
when the label A is dirty or damaged.
If the oven is equipped with manual humidification, in the back of the oven, near the
connector for water connection there is the label C.
Label C indicates water features necessary for a correct functioning of the oven.
Same features are listed at paragraph 2.3A of this manual.
19
EN