Kohler K-3357 Guia De Instalacion página 6

Tank Cover
Washer
Nut
Lift Rod
3. Install the Lift Rod
Insert the lift rod into the hole in the center of the tank cover.
Hold the lift rod while placing the large washer and nut onto the
other end of the lift rod.
Align the bent horizontal portion of the rod so the holes point
toward the front of the tank.
Hand tighten the nut until snug, then wrench tighten 1/4-turn.
Carefully set the cover onto the tank.
Carefully lift the front of the tank cover just enough to gain
access to the flapper chain and lift rod.
Insert the flapper chain S-hook into the middle hole in the lift
rod.
1021796-2-B
Tank Cover
Lift Rod
Tank
Tank
6
Flapper Chain
S-Hook
Kohler Co.