First Time Use - Würth BASIC Manual Del Usuario

Step 1: Lift the screw ring, rotate the screw ring in counter-clockwise direction to loosen the screw and
then open the battery cover.
(Figure.1)
Step 2: Install the batteries as indicated. Close the battery cover and tighten the screw.
(Figure.3)
Step 3: Remove the rubber cover which is located at the front of the insert tube.
(Figure.5)
2010-0275 0715 53 962_User Manual_110718.indd 13

First time use

(Figure.2)
(Figure.4)
Remove Protector
13
7/20/2011 1:37:02 PM