Trust SuperSpeed 2 Manual Del Usuario página 3

SuperSpeed 2 Port USB 3.0 Notebook ExpressCard – USER'S MANUAL
Package contents
Power indicator (green when powered)
USB 3.0 type A ports
Power connector (optional)
ExpressCard connector
USB Power cable (optional)
Install driver (Install driver)
Insert the Trust CD-ROM into your CD drive
Click "Run Setup.exe – Published by Trust International BV"
Click "Install driver"
User Account Control warning: Click "Continue"
Welcome to the Installshield: Click Next
License Agreement: Tick "I accept the terms..." and click "Next"
Choose Destination Location: Click "Next" (To change the Destination Location, click "Browse",
change the location and click "Next")
Ready to Install: Click "Install"
Installshield Wizard Complete: Click "Finish"
Insert card (Insert card)
ExpressCard slots exist in two versions (34mm and 54mm).
While this card fits in both types of slots, make sure the card is correctly inserted in 54mm slots.
Slide the card into your notebook's ExpressCard slot
A clicking sound indicates the card is fully inserted
A popup message indicates the driver was correctly installed. You can now connect USB devices to the
Trust SuperSpeed 2 Port USB 3.0 Notebook ExpressCard.
For full USB 3.0 performance, all devices and cables must be USB 3.0 compliant.
The Trust SuperSpeed 2 Port USB 3.0 Notebook ExpressCard is backwards compatible, and will also allow you to
use your USB 1.1 and USB 2.0 devices.
2