Hinkley 15446 Instrucciones De Instalación página 2

Wall Mount
5/8"
HINKLEY LIGHTING 33000 Pin Oak Parkway
Hole for wire routing,
can be on either side depending
on which side the wires are on.
Avon Lake, OH 44012
Installation Instructions
Family: Nuvi Hardscape | Item No. 15446
Wall Mount:
1. Score and break o the mounting bracket
2. Use the template to drill pilot holes in the wall.
3. Fasten screws (not included) in the wall. Leave about 1/8 of
an inch between the screw head and the wall.
4. Slide the xture over the screws. Tighten the screws with a
screw driver once the xture is in place.
Note: Fixture may be aimed upward to gaze or highlight a
surface
Painting:
The body of the xture can be painted to match or contrast
the installation location if the existing color is not desired.
Remove the LED engine from the body of the xture before
painting. To remove the engine, unscrew the nuts on the back
of the xture with a 3/16 inch size 1/4 inch drive 6 point
socket.
5"
4 3/8"
(p)800.442.5539 / (f ) 440.653.5555
1/8"
www.hinkleylighting.com