Helo CAMERA-B-KIT Guia De Inicio Rapido página 6

EN
III. Indicator Light Illustration
Base Station
Indicator Light 1
Indicator Light 2
SYNC Key
Power Port
SD Card Slot
USB Slot
WAN Port
Reset Button
Camera
Indicator Light
On/off Button
USB Charging Port
Reset Button
Solid Red: Activating
Quick Flashing Red:Waiting for Internet Pairing
Quick Flashing Green:Connecting to Server
Solid Green:Connected to Server Successfully
Slow Flashing Red: Device Fault
Slow Flashing Green: Device Upgrading
Flashing Green: Adding camera; The indicator light
will turn off after completion
SYNC:Press the SYNC key, the Base Station will enter
Adding camera status
Siren Off :When Siren on, press the SYNC key to turn it off
Power Supply Port
For local Storage (SD Card Max Capacity: 128GB)
Connect USB storage device for local storage, up to 2TB
Port to connect Router's LAN port
Press and hold for 3s, the base station will be reset.
Red LED blinks quickly: Standby for confi guration.
Green LED blinks quickly: Network pairing.
Green LED on : Camera online.
Yellow LED blinks slowly : Firmware upgrade.
Solid White LED ON : Camera charging
Red LED blinks slowly : Device fault.
SYNC: Press the button, then the device will enter Waiting
for Pairing status.
Power Button: Press the button to wake up it when the
camera is in deep sleep mode; Press and hold the button
for 3s, the camera will enter deep sleep mode.
Charging port
Press and hold for 3s, the device will power off and
reboot after reset setting, but the camera will not
be unbound.