Publicidad
01416
• RJ45 2 socket outlet for connection to IP video entryphone network (ETH2)
• Port for micro SD card
The router 01416 enables the transfer of information between the IP video entryphone net-
work and an IP user network; if the latter has an Internet connection, via the cloud, all remote
management functions for both installer and end user can be enabled. For an overview of
the integrated architecture, see the figure EXAMPLE OF INTEGRATED INFRASTRUCTURE.
OPERATION.
The router 01416 diversifies its functions according to the type of user (installer, end user or
touch screen supervisor) interacting with the device via the LAN/IP network associated to the
ETH1 interface on the router 01416.
Installer
Configures the router 01416, setting the Date/Time, End User, associates the supervisor devices
(touch screen art.s 01420, 01422 and 01425), etc.
End User
Uses the IP video door entry system services (video calls generated by outdoor units, notifica-
tions, messages and alarms) via local touch screens or via an APP, also remotely, via the cloud.
Functions available from the touch screen
- Outdoor unit self-starting.
- Outdoor unit lock opening.
- Audio intercom calls.
- Activating system actuations (stair light, auxiliary functions).
- System contacts list and favourites menu for quick access.
- Configurable video voicemail.
- Input for landing bell.
- Support for CCTV integration.
- Configuration of the router 01416 in the video entryphone system via the Video Door IP
Manager software.
Key functions
• F1= Key for emergency procedure: the network configuration in DHCP is indicated, and the
connection to the Cloud re-enabled (press for 10 s).
• F2= Key to request new IP address from the DHCP server (short press, only if set in DHCP on
the user/ETH1 home automation system domain network).
• F3= No function.
• CONF= Key for Installer user association.
LED indications
When the gateway is switched on only LED F1 comes on for the full duration of the start-up
procedure, and then - together with the other LEDs - signals the current operating status.
F1:
• On = Device working correctly.
• Flashing = Device reset in progress.
• Off = Device not working or Cloud enabled but not reachable.
F2 (router state in relation to the user IP/LAN network connected to the ETH1 socket outlet):
• On = Connection active and running.
• Off = No Ethernet connection (cable disconnected).
• Flashing = Connection active and running but with no IP address assigned (check the DHCP
server).
F3 (router state in relation to the IP video entryphone connected to the ETH2 socket outlet):
• On = Connection active and running.
• Off = No bus connection (cable disconnected).
• Flashing = Connection active and running but with no video entryphone functions configured.
CONF: The LED comes on when the user/device is pairing.
INSTALLATION RULES.
• Installation must be carried out by qualified persons in compliance with the current regulations
regarding the installation of electrical equipment in the country where the products are installed.
• The router 01416 must be installed inside the electrical panels and must therefore be housed
in the containers with DIN rail support.
• The router 01416 can be powered by:
- Power supply 01831.1 (output 12V).
- Power supply 01400 or 01401 (via output 29V "AUX").
• Maximum power cable length: 10 m (from power supply to router 01416).
• Power cable section: 2x0.5 mm
up to 2x1.0 mm
2
• The ethernet line must be wired with a UTP (non-shielded) cable, CAT.5e or superior.
• Maximum Ethernet cable length: 100 m.
• The router 01416 must be wired to the IP video door entry system (via the ETH2 interface)
according to the rules adopted for a standard IP video door entry system.
• All electrical interfaces on the device are SELV. The device must therefore be installed in high-
voltage-free SELV electrical panels; if present, the installer must guarantee double insulation
between the high voltage and the SELV.
49400909A0 04 2009
.
2
• In the event of access to mini/micro USB, micro SD ports and reset button (SELV interfaces),
comply with the measures required to prevent electrostatic discharge from the user, which
could damage the device.
WARNING: Update the firmware to the latest version! You can download it via cloud (with
the device connected to the Internet) or from www.vimar.com Download Software
VIEW Pro.
The VIEW Pro APP manual can be downloaded from the www.vimar.com website using
the router 01416 article code.
REGULATORY COMPLIANCE.
EMC directive. Standards EN 60950-1, EN 61000-6-1, EN61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not
be included with other general waste at the end of its working life. The user must take the worn product to
a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be
consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m
if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal
of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment
and people's health, and encourages the re-use and/or recycling of the construction materials.
Router IoT pour l'intégration du système portier-vidéo IP au réseau IP/LAN,
cloud et App pour smartphone, tablette ou écran tactile de supervision, instal-
lation sur rail DIN (60715 TH35), occupe 4 modules de 17,5 mm.
Le router 01416 permet de connecter le système portier-vidéo IP au réseau Ethernet LAN de
l'utilisateur pour gérer le système portier-vidéo IP avec les systèmes domotiques Vimar. La con-
nectivité IP/LAN utilisateur permet d'exécuter toutes ces opérations localement ou à distance
avec les App disponibles pour Android/iOS.
CARACTÉRISTIQUES.
• Alimentation: 12-30 Vcc SELV
• Consommation:
- 300 mA max à 12 Vcc
- 140 mA max à 30 Vcc
• Puissance maxi dissipée : 4 W
• Connexion aux réseaux LAN par la prise RJ45 (10/100 Mbps)
• 4 boutons de commande rétroéclairés
• Entrée pour appel palier
• Température de service: - 5 + 40° C (à l'intérieur)
• Humidité ambiante de service 10 - 80 % (sans condensation)
• Indice de protection IP30
BRANCHEMENTS.
• Bornes:
- alimentation 12- 30 Vcc SELV
• Prise RJ45 1 pour connexion au réseau Ethernet (ETH1) du domaine utilisateur/domotique
• Prise RJ45 2 pour connexion au réseau visiophonique IP (ETH2)
• Port pour carte micro SD
Le router 01416 commande le transfert des informations entre le réseau visiophonique IP et
le réseau IP de l'utilisateur ; avec une connexion Internet, les fonctions de gestion à distance
peuvent être activées par le cloud pour l'installateur et pour l'utilisateur. Pour un aperçu de
l'architecture intégrée, voir la figure EXEMPLE D'INFRASTRUCTURE INTÉGRÉE.
FONCTIONNEMENT.
Le router 01416 diversifie ses fonctions selon le type d'utilisation (installateur, utilisateur ou écran
tactile de supervision) en interaction avec elle par le réseau LAN/IP associé à son interface ETH1.
Installateur
Il configure le router 01416, sélectionne la date et l'heure, l'utilisateur, associe les dispositifs de
supervision (écran tactile art. 01420, 01422 et 01425), etc.
Utilisateur final
Il utilise les services du système portier-vidéo IP (appels vidéo des postes extérieurs, notifications,
messages et alarmes) par les écrans tactiles locaux ou sur son APP et à distance, par le cloud.
Fonctions disponibles sur l'écran tactile
- Activation automatique poste extérieur
- Ouverture électroserrure poste extérieur
- Appels audio intercommunicants
- Activation fonctions de l'installation (éclairage escalier, fonctions auxiliaires)
- Répertoire de l'installation et menus favoris pour l'accès rapide
- Messagerie vidéo configurable
- Entrée pour sonnette palier
- Support pour intégration CCTV
- Configuration de le router 01416 dans le système portier-vidéo avec le logiciel Video Door IP
Manager
2
,
Viale Vicenza, 14
36063 Marostica VI - Italy
www.vimar.com
Publicidad
