Eschenbach visolux Manual De Instrucciones página 40

6. Open the settings menu, select the
ond menu level and then press the
7. Use the two scroll buttons (q, i) to select the
and then press the
date and return to the previous page, select the
and press the
"During Fw update. . . " message appears on the display.
If the update has been successful, the visolux DIGITAL HD switch-
es off automatically. Never switch the device off and never
remove the SD card from the device during a firmware up-
date. Otherwise, the visolux DIGITAL HD could be irreparably
damaged. This type of damage is not covered by the guarantee!
HDMI connection
You can use the HDMI cable supplied to connect the device from
its HDMI output (u) to the HDMI input on another device, e.g. a
television. This enables both the camera image and the image
files to be displayed on the connected device.
USB connection
You can use the USB cable supplied to connect the device from
its USB connection (r) to the USB connection on another device,
e.g. a computer. The SD card inserted in the device will then be
made available as the "ESCHENBACH" drive for data operations.
Reset
If the reader stops working as described in this manual, it may be
due a fault that you can rectify yourself by resetting the reader.
Insert a small, pointed object carefully into the housing opening
(2!) and press the switch contained inside it.
button. If you want to cancel the up-
button. During the firmware update, the
- 37 -
symbol in the sec-
button.
symbol
symbol