Waldbeck Halley Manual Del Usuario página 68

Estación meteorológica profesional
Ocultar thumbs Ver también para Halley:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
68
Mount outdoor sensor
Mounting outdoor sensor to your mounting pole (purchased separately) with
the U-bolts as shown in Figure 8.
Figure 8
Use the bubble level beside the rain sensor as a guide to verify that sensors are
level.
Reset Button and Transmitter LED
In the event the sensor array is not transmitting, reset the sensor array.
With an open ended paperclip, press and hold the RESET BUTTON for
three seconds to completely discharge the voltage.
Take out the batteries and wait one minute, while covering the solar panel
to drain the voltage.
Put batteries back in and resynchronize with console by powering down
and up the console with the sensor array about 10 feet away.
Figure 9

Publicidad

Tabla de contenido
loading

Productos relacionados para Waldbeck Halley

Este manual también es adecuado para:

10032926

Tabla de contenido