• Power 100-240V ~ 50/60Hz
• Output current/voltage 3V / 600mA
• Ni-MH battery 600mAh
• Charging time of 8 hours
• Battery life 45 minutes
• Stainless steel blades
• 2 combs (from 3mm to 15mm and from 18mm to 30mm)
GENERAL DESCRIPTION
1. Thinning out adjuster
2. Switch ON/OFF
3. Adjustment wheel
4. Indicator light
5. Blade
6. Adaptor
7. Cutting guide
8. Cleaning brush
9. Oil Bottle
CHARGING THE DEVICE
Charge the device fully before using it for the first time or if it has not been used for a prolonged period.
- Make sure the device is switched off.
- Connect the device to the base cable and then plug the base cable into the mains socket.
- When the device is charging, the LED turns red.
- When the device is on, the LED turns green.
- When the device is fully charged, the LED turns green.
- On a full charge, battery life can last for up to 45 minutes.
- The full recharge time is 8 hours.
FASTENING AND REMOVING THE CUTTING GUIDE
Select the cutting guide with the required length. Place it on the upper part of the trimmer blade and gently push it onto
the trimmer blade until it snaps into place.
To remove the cutting guide, hold it, pull it upwards and separate it from the trimmer.
TRIMMER USE
The cutting guide guarantees an even cut. Always attach the cutting guide before turning the clipper on and turn the
clipper off before changing or removing the guide.
Use the adjustment wheel to adjust the length of the cutting guide.
- Switch the device on.
- Place the fastened flat top of the guide comb against the skin.
- Slowly move the guide comb of the trimmer while keeping it as close to the hair as possible. Repeat by moving the
device in various directions if necessary.
- If hair accumulates in the guide comb during use, switch the device off, take off the comb and remove the hair.
MAINTENANCE
- Regular maintenance of the trimmer blades is required to keep it in optimal operating condition.
- Make sure the device is switched off and unplugged.
- Remove the cutting guide and clean it with the cleaning brush provided.
- Brush the blades thoroughly with the cleaning brush to remove the hair.
REMOVE THE BATTERY
The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the battery.
The battery is to be disposed of safely.
This symbol, displayed on the product or on its packaging, indicates that this product complies with the European
Directive 2012/19/EU and must not be disposed of with household waste.
It must be taken to an appropriate collection point for recycling electrical and electronic equipment.
By ensuring that this product is disposed of in an appropriate way, you will be helping to prevent potential harmful
consequences for the environment and human health.
Recycling materials will help to conserve natural resources.
This symbol means that the appliance contains an integrated rechargeable battery which must not be discarded
with household waste (European Directive 2013/56/EU). The rechargeable battery contains substances which may
be dangerous to the environment. Always remove the battery before discarding the appliance or take it somewhere
intended for this purpose.
6
Notice_FPH-008_V.indd 6
14/03/2019 14:37