Wattio DOOR Manual Del Usuario página 16

The notifications must be activated and deactivated on the mobile app.
RESET
In case the sensor does not connect correctly to the GATE, it could be necessary to reset the
device and switch it on again.
To reset to the original
configuration status,
pressed both buttons together
until the indicator flashes red
twice and then twenty times.
It is recommended to remove
the batteries if the device will
be switched off for a long time.
keep
16
Once registered, the alarms
must be created on the web
app, to receive notifications.
An alarm must be created with
its corresponding actions and
notifications in case and to make
it work, the alarm must be
assigned to the corresponding
device.