Safety Instructions - Axis D2110-VE Manual Del Usuario

AXIS D2110-VE Security Radar

Safety instructions

DANGER
Risk of electric shock. All cables shall be de-energized before installing or performing
maintenance on the product.
WARNING
The Axis product shall be installed by a trained professional, and in compliance with local
laws and regulations.
CAUTION
Be careful of sharp metal edges. Use cut-resistant gloves during installation.
NO TICE TICE
NO NO TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Axis recommends using a shielded network cable (STP).
• Axis recommends using a network cable of category CAT6 or higher.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Avoid exposing the Axis product to vibration.
• Do not install the product on unstable poles, brackets, surfaces or walls.
• Do not install the product on vibrating poles, brackets, surfaces or walls.
• Use only applicable tools when installing the Axis product. Using excessive force with
power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use a clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with the technical specification of your product. These
can be provided by Axis or a third party. Axis recommends using Axis power source
equipment compatible with your product.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller
for service matters.
• Use a yellow/green colored grounding cable of at least 1.5 mm
Transportation
NO NO TICE NO TICE TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
28
2
or 15 AWG.