Ada CUBE 2-360 Green Manual Del Usuario página 6

6 English
CARE AND CLEANING
Please handle measuring line laser with care. Clean with soft cloth only
after any use. If necessary damp cloth with some water. If line laser is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in
original container/case only.
Note: During transport On/Off compensator lock (5) must be set to posi-
tion "OFF". Disregard may lead to damage of compensator.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After line laser has been dropped or hit. Please check the accuracy;
• Large fluctuation of temperature: if instrument will beused in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
• It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic ra-
diation nearby industrial facilities or radio transmitters).
PRODUCT LIFE
Product life of the tool is 7 years. The battery and the tool should never
be placed in municipal waste. Date of production, manufacturer's contact
information, country of origin are indicated on the product sticker.
4
LASER CLASS 2 WARNING LABEL ON THE LINE LASER
LASER CLASSIFICATION
The line laser is a laser class 2 laser product accortding to DIN IEC 60825-
1:2014. It is allowed to use unit without further safety precautions.