Zero Configuration Service - Ansel 2613 Guia Del Usuario

5.If the Found New Hardware Wizard displays, choose install the software automatically
(Recommended), and click Next button. The driver will be installed automatically. You can refer to
Cardbus.
6. if you'd like to use utility with adapter, please refer to Chapter 3. Configuration. if you select
Microsoft configuration tool.

2.3 Zero Configuration Service

Windows XP includes the Zero Configuration Service, a built in service to configure your wireless
clients from within Windows. Skip to Section three configuration if you would rather use MIMO
Driver to configure your wireless client.
If the Wireless Zero Configuration Service is activated, Windows will scan for available wireless
access points once the Wireless PCI/CardBus Adapter is properly installed. If Windows detects one
or more access points, a networking icon appears within the system tray. "One or more wireless
networks are available".
To start Wireless Zero Configuration manually, click Start >> Control Panel >> Administrative Tools
>> Services. Select Automatic in the Startup Type field of Wireless Zero Configuration Service.
Right click the networking icon in the taskbar and select View Available Wireless Networks. Select an
SSID and click Connect. You may need to check the box indicating you are connecting to an
unsecured network. See section 3 if you need to enter an SSID network name or WEP/WPA
encryption key.
Figure 2-13
Página 30 de 41