Ansel 2613 Guia Del Usuario página 33

1 Definition of each field
a. SSID: Name of BSS of IBSS network.
b. BSSID: MAC address of AP or randomly generated of IBSS.
c. Signal: Receive signal strength of specified network.
d. Channel: Channel in use.
e. Encryption: Encryption algorithm used within than BSS or IBSS. Valid value includes WEP,
TKIP, AES, and Not Use.
f. Authentication: Authentication mode used within the network, including Unknown,
WPA-PSK, WPA2-PSK, WPA and WPA2.
g. Network Type: Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network.
2 Connected network:
a. When RaConfig first ran, it will select the best AP to connect automatically.
b. If user wants to connect to other AP. He can double click mouse on the intended AP to make
connection.
c. If the intended network has encryption other than ?Not Use ? RaConfig will bring up the
security page and let use input the appropriate information to make the connection. Please refer to
section 4 on how to fill the security information.
This icon indicates the change is successful.
3 Indicate connection status, the connected network's SSID will show up here.
4 Issue an rescan command to wireless NIC to update information on surrounding wireless network.
5 Command to connect to the selected network.
6 Add the selected AP to Profile settin. It will bring up profile page and save user' setting to a new
profile.
Página 33 de 41